Decorative Return Air Wall Grate - Pattern I

Pattern Cut decorative Filter Grilles accentuate any room. They can be painted to match your walls or stained to match your trim. These filter grilles come in 26 different designs for you to choose from. They also come in 56 sizes, if you don't see the size you need listed in the drop down menu, call us at 800-504-5989 to get a quote. These wooden grilles are measured by the size of the duct opening in your wall. Measure your return air duct opening width x height. For example, if your duct opening is 10" wide x 6" high you would order a 10 x 6 return air grille. The actual faceplate of the grille will then be 2" larger (in this example the faceplate will be 12" x 8"). These grilles are constructed from a 1/4" thick Baltic Birch ply. For the face of the return air vent, you have the option of choosing between Maple, Oak, or a Cherry Veneer. If you will be painting the grille, the manufacturer recommends you select the maple veneer. They are shipped to you sanded and ready to be finished however you'd like. 

These wood filter grilles are made to order and may take 3-5 weeks to ship. They are considered special order, non-returnable and cannot be canceled once payment is received.

Choose From 3 Different Veneers:
(Click for larger image)

How to Order Your Decorative Return Air Wall Grille

- Measure the hole in your wall (w" x h")
- In the first drop down menu select the size you measure.
Ex. If your hole measure 12" wide x 6" high, select 12 x 6.
Hint: The actual faceplate of the grille will be 2" larger than the hole (in the previous example the grille would measure 14" x 8")
- Choose which wood veneer you want the face of your grille to be.
Hint: If you plan to pain the grille, the manufacturer recommends choosing the Maple veneer.
- In the final drop down menu select your wood choice.

These decorative filter grilles are meant to be used on the wall and ceiling only. They are not strong enough to be used on the floor.